where's what i get when i try to burn an iso with k3b:
Code:
System
-----------------------
K3b Version: 0.12.14
KDE Version: 3.5.2
QT Version: 3.3.6
Kernel: 2.6.15-15-386
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4160B A301 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
Used versions
-----------------------
cdrecord: 2.1.1a01
cdrecord
-----------------------
/usr/bin/X11/cdrecord: Warning: Running on Linux-2.6.15-15-386
/usr/bin/X11/cdrecord: There are unsettled issues with Linux-2.5 and newer.
/usr/bin/X11/cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.33
/usr/bin/X11/cdrecord: Warning: using inofficial version of libscg (debian-0.8debian2 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
/usr/bin/X11/cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code.
/usr/bin/X11/cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'debian-0.8debian2'.
atapi: 1
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4160B'
Revision : 'A301'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13993 kB/s 79x CD 10x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 696 MB
Total size: 799 MB (79:15.40) = 356655 sectors
Lout start: 800 MB (79:17/30) = 356655 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -12375 (97:17/00)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 3 5
recommended erase/write power: 3
A1 values: 02 3A B0
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 3194
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
/usr/bin/X11/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
/usr/bin/X11/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.006s timeout 200s
/usr/bin/X11/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.006s timeout 200s
/usr/bin/X11/cdrecord: A write error occured.
/usr/bin/X11/cdrecord: Please properly read the error message above.
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01: 0 of 696 MB written.
write track data: error after 0 bytes
Writing time: 73.178s
Average write speed 65.0x.
Fixating...
Fixating time: 0.004s
/usr/bin/X11/cdrecord: fifo had 64 puts and 1 gets.
/usr/bin/X11/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/X11/cdrecord.mmap -v gracetime=2 dev=1,0,0 speed=4 -dao -eject -data /home/miguel/MyDownloads/SUSE-Linux-10.1-GM-i386-CD1.iso
don't know what is wrong...
any ideas?
thanks in advance,
Miguel
Bookmarks